CORTES LEVANTE Y LASER LEVANTE

TO BE
To the three centers of cut of ños that we have, one of them of
carbon steel and other fiber, we expand a center over
cutting, incorporating the machine TruLaser 5040 fiber, 8kw and a box
4000 x 2000 mm., thus having three high cutting centers
productivity and efficiency, with results of the highest quality.
By bringing BrightLine incorporated, we get some cutting edges
completely smooth in stainless steel.
We cut Carbon Steel 25, Stainless and Aluminum 40, Brass, Copper
and bronze 10.
We advise on the choice of the most suitable steel, giving information
technique on impact and tensile strength, thicknesses, finishes
surface, application, corten steel, flame cutting, etc …
We have a large stock of steel sheets, in thicknesses that
They range from 1.5 to 400 mm. and of the maximum dimensions existing in
the market.
Each steel sheet served, has a corresponding
Quality certificate. according to the requested standard.
Steel products in stock for quick availability.
PLASMA
It is based on the thermal and mechanical action of a gas jet
heated by an electric current arc established
between an electrode located in the torch and the workpiece. The jet
Plasma launched against the piece penetrates the entire thickness to be cut,
melting and expelling the material.
Cut any material that is electrically conductive.
Ideal for cutting highly alloyed steels and alloyed aluminum
medium or high thickness.
Very suitable for cutting sweet steels up to 40 mm. from
thickness.
Very low heat input during cutting.
High cutting speed, in some cases up to 10 times that of the oxycut.
Clean cuts without further treatment.
Possibility to bevel the cut.
Possibility of greater thicknesses (see).
OXICORT
We have four flame cutting centers, capable of cutting
steel with pinpoint accuracy.
Process that uses a combustible gas, whose effect is to produce a
flame to heat the material and oxygen as a oxidizer, in order to
cause oxidation required for the cutting process.
Suitable for medium and high thickness range.
Possibility to bevel the cut.
Specialists high thickness of 500 mm.
FOLDING, ASSEMBLY,
PAINT AND FINISH
We have expanded the folding section, with two new machines
Last generation.
We give the possibility of supplying PARTS AND SUBJECTS
completely finished:
Folding, Welding, Countersunk Threading, Painting, Mounting.
IRON ROLL AND
NON-FERRIC PRODUCTS
CARBON STEEL,
STAINLESS,
ALUMINUM,
BRASS, COPPER,
BRONZE,
CALIBRATES, ETC.
CONSTRUCTION STEELS
CORTEN steel.
S355J0WP, S355J2G1W, S355J2G2W / S355J2W + N
• F-1430, 50 CrV4 / Chrome, Springs and leaf springs.
• S355 J2 + N / J2 G3.
Carbon • C-45, F-114 (F-5).
Manganese • 42CrMo4, F-1252.
SPECIAL STEELS
ANTIDESASAS:
• 320 HB, 400 HB, 450 HB, etc.
FOR PRESSURE CONTAINERS,
BOILERS AND DEPOSITS,
RESISTANT TO LOW TEMPERATURES:
• 265 GH, HII. Acer or for boilers.
• SA 516 GR 60/70 N + S5. Boilers and pressure.
• P355 NL1 (TSTE-355) / P460 NL1 (TSTE-460).
Low temperatures.
FOR HALF AND HIGH TEMPERATURES:
• 16Mo3 (15Mo3) / 13CrMo4-5 / 10CrMo910.