The Felsomat Flexible Hobbing Center 180 is setting a new standard in the complete machining of precision gears. Especially developed for high speed cutting (HSC process) for transmission manufacturing, the FHC 180 is reducing the cost per part up to 30% with the integration of chamfering, deburring and parallel loading / unloading in a gear manufacturing system. Highest production within the smallest foorprint.
High Performance Facts:
Chip-to-chip time < 1 second due to
loading/unloading parallel to the processing
pendular machining with 2 spindles
Lowest cost per piece and longer tool life
Ideal for dry machining
Rigid and sturdy work pice –and tooling spindle, Increased cutting paramters and tool life.
Shorter machining time due to higher material removal rate
Finish machining in final quality IT4 to IT5 with the single cut or a dressing cut process
More than double life cycle time by two spindles with lower acceleration and deceleration.
Easy change over through an excellent access and an ergonomical work holding and hob tool change < 10 min.
Easy operator interface with intelligent technology software package
Singular construction design with lift hooks for easy redeployment
For a multitude of manufacturing possibilities:
Parallel to main processing time push-roll-deburring with fettling wheel and elimination of the resulting scondary burr at the flank with the dressing cut
Finish machinig in final quality IT4 to IT5 with the single cut or a dressing cut process
Convenient tool change:
To change the hob cutter, the hob head is swiveled into a vertical position prior to the operator accessing the work area. Based on the excellent access and the use of both hands a hob cutter change is possible in only 30 seconds.
